Technology partner · Siemon
Siemon structured cabling installation
Siemon copper and fiber cabling systems, installed to spec and certified link by link.
The short answer
WCC installs Siemon structured cabling across Southern California, including Cat6 and Cat6A copper, fiber connectivity, and the racks and cable management that hold it. Every link is certified with a cable tester and documented, so the system can be supported for its full service life.
What we install
Siemon products we install
| Product | Use |
|---|---|
| Cat6 and Cat6A cable and jacks | Office, classroom and access point drops |
| Shielded systems | Noisy environments and high-power PoE |
| Fiber enclosures and connectivity | Backbones and data centers |
| Racks and cable management | Closets and server rooms |
When Siemon fits
When to choose Siemon
Siemon is often specified for data centers, hospitals and buildings that want a single-manufacturer copper and fiber system. It's also a strong choice for shielded Cat6A where high-power PoE and electrical noise are concerns. We install it to the spec and certify every link. See network cabling.
Cost
What structured cabling costs
| Item | Typical installed range |
|---|---|
| Cat6 data drop | $150–$400 per drop |
| Cat6A data drop | $225–$500 per drop |
| Fiber backbone | Priced per run after a site walk |
See the cabling cost per drop guide.
How it works
How a cabling project runs
Design
Drop counts, pathways, closets and standards planned.
Design
Install
Cable pulled, terminated and dressed.
Install
Test
Every link certified, labeled and documented.
Closeout
Why WCC
Why buy Siemon from WCC
Installed by our own team
California installs are done by WCC technicians, not handed to a subcontractor after the sale.
RCDD-led design
Cable plants designed under a BICSI Registered Communications Distribution Designer.
Licensed since 2003
CSLB #819788 with C-7, C-10 and C-28 classifications, plus CMAS and OMNIA Partners for public agencies.
FAQ
Siemon questions
Does WCC install Siemon cabling?
Yes. WCC installs Siemon copper and fiber systems in Southern California.
Do you certify every link?
Yes. Every copper link is certified with a cable tester and every fiber strand is tested, with results delivered.
Shielded or unshielded Cat6A?
Shielded suits noisy environments and high-power PoE; unshielded is fine for most offices. We follow your spec or recommend one.
How much does a Cat6A drop cost?
Typically $225 to $500 per drop installed.
Can you match an existing Siemon system?
Yes. We extend existing Siemon systems to keep a single manufacturer.
Related
Related guides and services
Get a recommendation
Talk to us about cabling
Send your drawings or drop count, and we'll price the cabling.